6" 45º bend With Inspection Door (316 1mm)
stove pipe used to offset the direction of your flue system by 45°.
Inspection door gives you easy access for sweeping and inspecting your installation
6" 45º Bend With Inspection Door (316 1mm)
stove pipe used to offset the direction of your flue system by 45°.
Inspection door gives you easy access for sweeping and inspecting your installation
| Designation | EN 1856-1 T600 N1 D V2 L50040 G |
|---|---|
| Construction | Stainless Steel |
| Inner Material: | Single Skin 316 Stainless Steel. 1mm thickness |
| Fuels: | Gas, oil, solid and multi-fuel |
| Outer Diameter | - |
Installation Guide
316/1mm stove pipe should be installed 3 x the internal diameter of the flue away from any combustible materials, e.g: a 6" diameter piece of 316 pipe should be 18" away from combustible materials.
Each joint made should be sealed with fire cement. 316 flue pipe is only to be used as a connecting piece of flue between the appliance (eg: woodstove) and the flue liner or chimney stack.
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.
Download Document J Regulations