6" 90º bend (316 1mm)
£49.01 £58.81
In stock
SKU
SP0166
stove pipe used to offset the direction of your flue system by 90°.
6" 90º Bend (316 1mm)
stove pipe used to offset the direction of your flue system by 90°.
| Designation | EN 1856-1 T600 N1 D V2 L50040 G |
|---|---|
| Construction | Stainless Steel |
| Inner Material: | Single Skin 316 Stainless Steel. 1mm thickness |
| Fuels: | Gas, oil, solid and multi-fuel |
| Outer Diameter | - |
Installation Guide
316/1mm stove pipe should be installed 3 x the internal diameter of the flue away from any combustible materials, e.g: a 6" diameter piece of 316 pipe should be 18" away from combustible materials.
Each joint made should be sealed with fire cement. 316 flue pipe is only to be used as a connecting piece of flue between the appliance (eg: woodstove) and the flue liner or chimney stack.
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.
Download Document J Regulations