Chimney Capper - With Vent
Suitable for Unused chimneys only
Chimney Capper - With Vent
The Colt chimney capper with vent is designed to cap an unused chimney, to save heat loss and to protect the chimney from rain ingress together with the entry of birds and debris.
Suitable for Unused chimneys only
To fit chimneys with internal diameter of 125mm to 250mm. Â External diameter of 285mm
Designation | EN 1856-2 T600 N1 W V2 L80100 G450NM |
---|---|
Construction | Steel |
Inner Material: | 1.2mm Steel, Vitreous Enamel Black Coating |
Fuels: | Gas, Oil, Solid Fuels, Wood, Pellets, Peat |
Approvals | HETAS |
Warranty: | 10 Years |
Outer Diameter | - |
Installation Guide
When using stove pipe, you must have a clearing distance of 3x the internal diameter of the size of pipe you are using from any combustable material for the entirety of the installation.
You can only use 1.5 meters of stove pipe for any installation before either switching to a flexi or twin wall system.
If your stove pipe is a loose fit, we sell fire rope and fire cement to pack out the pipe to ensure that a safe connection is established.
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.
 Download Document J Regulations
Â
Â
Â