5" 150mm Length (316 1mm)
Used to connect from your stove to either flue liner or twin wall insulated rigid flue pipe
5" 150mm Length (316 1mm)
Used to connect from your stove to either flue liner or twin wall insulated rigid flue pipe.
| Designation | EN 1856-1 T600 N1 D V2 L50040 G |
|---|---|
| Construction | Stainless Steel |
| Inner Material: | Single Skin 316 Stainless Steel. 1mm thickness |
| Fuels: | Gas, oil, solid and multi-fuel |
| Outer Diameter | - |
Installation Guide
316/1mm stove pipe should be installed 3 x the internal diameter of the flue away from any combustible materials, e.g: a 6" diameter piece of 316 pipe should be 18" away from combustible materials.
Each joint made should be sealed with fire cement. 316 flue pipe is only to be used as a connecting piece of flue between the appliance (eg: woodstove) and the flue liner or chimney stack.
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.
 
Download Document J Regulations
Â
Â
Â