7" Register Plate 18" x 36"
The 7" register plate is used to seal off the stack at the bottom of your chimney. It comes complete with an adjustable plate for ease of installation and with 2x angle brackets for fixing. The plate is removable should inspection need to be carried out on the liner
7" Register Plate 18" x 36"
The 7" register plate is used to seal off the stack at the bottom of your chimney. It comes complete with an adjustable plate for ease of installation and with 2x angle brackets for fixing. The plate is removable should inspection need to be carried out on the liner
You are able to cut the register plate, should it be too large to accommodate the size of your stack
This product will support vermiculite and stop debris from within the stack coming down the chimney and damaging your stove
Construction | Galvanised Steel |
---|---|
Outer Diameter | - |
Installation Guide
Register plate, the metal plate and supporting angle brackets will need cutting to size. Secure the brackets to the inside of the chimney (fixings not supplied) the single skin pipe from the appliance will need to pass through the adjustable centre plate.
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.
 Download Document J Regulations
Â
Â
Â